1 - 1 6
1 - 1 6
1 - 1 6
1 - 1 6
1 - 1 6
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
State After Power Failure
This option will determine how the system will power on
after a power failure.
The Choices: Auto
(default), On, Off.
CMOS Setup Utility-Copyright(C) 1984-2001 Award Software
Wake Up Events
VGA
OFF
Item Help
LPT & COM
LPT/COM
HDD & FDD
ON
Menu Level
PCI Master
OFF
Wake Up On LAN/Ring
Disabled
RTC Alarm Resume
Disabled
Date (of Month)
0
Resume Time (hh:mm:ss)
0 0 0
Primary INTR
ON
IRQs Activity Monitoring
Press Enter
←→↑↓
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help F5:Previous Values F6:Fail-Safe Defaults
F7:Optimized Defaults
Wake Up Events
If you highlight the “Press Enter” next to the “Wake Up
Events” label and then press the enter key, it will take you
to a submenu with the following options:
VGA
When set to On, any event occurring at a VGA port will
awaken a system which has been powered down.
LPT & COM
When set to On, any event occurring at a COM(serial) /
LPT (printer) port will awaken a system which has been
powered down.
HDD & FDD
When set to On(default), any event occurring at a hard or
floppy drive will awaken a system which has been powered
down.
PCI Master
When set to On, any event occurring at a PCI port will
awaken a system which has been powered down.
