1 - 1 5
1 - 1 5
1 - 1 5
1 - 1 5
1 - 1 5
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
PM Control by APM
No
System BIOS will ignore APM
when Power Management is
on.
Yes (default)
System BIOS will wait for
APM’S prompt before it enters
any PM mode.
Video Off Option
This field determines when to activate the video off feature
for monitor power management.
Video Off Method
This determines the manner in which the monitor is
blanked.
V/H SYNC+Blank
This selection will cause the
(default)
system to turn off the vertical
and horizontal synchronization
ports and write blanks to the
video buffer.
Blank Screen
This option only writes blanks
to the video buffer.
DPMS Support
Initial display power
management signaling.
Modem Use IRQ
This determines the IRQ, which can be applied in Modem
use.
3 (default)
4/5/7/9/10/11/NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces
the system to enter the Soft-Off state when the system has
“hung”.
The Choices: Instant-Off
(default), Delay 4 Sec.
