36
Notes:
●
When a new strip is already inserted into the meter before it is
connected to a PC, the meter will give an E-12 error message. The
meter is waiting for a blood sample and will not switch to “PC” mode.
●
When the meter is in “PC” mode, it will not change to waiting for sample
mode if a strip is in the meter.
3. The meter will turn itself into “PC” mode after the data transfer cable is
plugged into the meter data port. When the cable is plugged into the PC,
the PC software program will automatically run. The data transfer from
meter to PC starts automatically.
4. During the data transfer, the meter will display
“to” and “PC”. This means the data is being
transferred from the meter to the PC.
5. Once the data transfer is complete, the meter will
display “End” and “PC”.
6. After the data transfer from the meter to PC is completed, press the <OK>
button to turn off the meter. If nothing happens 2 minutes after the data
transfer from meter to PC is completed, the meter will automatically turn
off. In this case press both the <
▲
> and <
▼
> buttons to enter “PC” mode
again.
See the package insert included with your
On Call
®
Diabetes Management
Software Kit for detailed instructions.
