26
•
Repeat the same set up procedure for Test Reminder 3, 4 and 5.
•
After finishing the fifth Test Reminder set up, it will then end the setup mode
and power off the meter.
If one or more test reminders have been set, the reminder symbol will always
appear on the LCD screen when the meter is turned on. The display sample is
shown below.
The meter beeps 5 times at the time you set, again two minutes later, and two
minutes after that unless you insert a test strip or press any button. This
function will still work with Audio feature turned off.
When the meter beeps at the time set by the Test Reminder feature, the date,
time and strip symbol will be displayed. And the Test Reminder symbol will be
flashed. The display sample is shown below.
NOTE:
•
The “Meal Marker”, “Ketone Indicator” and “Hyper/Hypo Indicator” are only
for indicating blood glucose test results.
•
For any step of the set up, if the M button is pressed and held, it will allow a
faster adjustment.
•
The user can press and hold the S button for 2 seconds to stop the set up and
turn off the meter during any step of the set up process, except when setting
up the year, date and time for the first time after installing a new battery.
OR
OR
