22
ketone code chip does not match the number that is displayed on the screen,
please contact your local distributor immediately.
Note:
The most recently used ketone code will be stored in the meter as a
default ketone code for the rest of your blood
β
-ketone tests, until you insert a
new ketone code chip into the meter.
4. If a blood ketone test strip is inserted and no ketone code is stored in memory,
the display will flash “- - -” and “CODE”.
Step 2 – Adjusting the Meter Settings
Before using your meter for the first time, you will need to adjust the settings that
are listed in detail below.
1. Meter Setup Mode: Press the S button for 2 seconds to enter the meter setup
mode. The meter will automatically enter the setup mode when turned on for
the first time by any method.
2. Clock: Set the clock for either 12 or 24 hour mode. Press the M button to switch
between the two settings. Then press the S button to save your choice and
then start setting the year, month and date.
Note:
The clock needs to be reset after replacing the battery.
3. Date: The year will appear at the top of the display. Press the M button until the
correct year is displayed. Once you have selected the correct year, press the S
button to save your choice and start setting the month. Press the M button until
the correct month is displayed. Then press the S button to save your choice
and start setting the date. Press the M button until the correct date is displayed.
Then press the S button to save your choice and start setting the time.
OR
Year Month Date
