18
11. Test Reminder: Test reminders are a useful way to remind you when to test
your patients. You can set 1 to 5 reminders per day. Your meter is preset with
the test reminder disabled. You must turn it on to use this feature.
• Press the left (◄) button to turn the first Test Reminder “On” and “Off”.
Press the right (►) button to confirm your selection. When the Test
Reminder is “Off”, pressing the right (►) button will go to the set up of the
second Test Reminder. When the Test Reminder is “On”, pressing the
right (►) button will
go to the set up of the time for the first Test Reminder.
Press the left (◄) button
to adjust the first Test Reminder time. Press the
right (►) button to confirm the first Test Reminder time and then go to the
second Test Reminder set up.
• When the Test Reminder is “Off” during the second Test Reminder set
up, pressing the right (►) button will go to the set up of the third Test
Reminder. When the Test Reminder is “On”, pressing the right (►) button
will go to the set up of the time for the second Test Reminder. Press the
left (◄) button to adjust the second Test Reminder time. Press the right
(►) button to confirm the second Test Reminder time and then go to the
third Test Reminder set up.
• Repeat the same set up procedure for Test Reminder 3, 4 and 5.
• After finishing the fifth Test Reminder set up, it will then end the setup
mode and power off the meter.
If one or more test reminders have been set,
the reminder symbol will always appear on the
LCD screen when the meter is turned on. The
display sample is shown below.
The meter beeps 5 times when it is first set. It will
beep again two minutes later, and two minutes
after that unless you insert a test strip or press
any button. This function will still work with Audio
feature turned off.
When the meter beeps at the time set by the
Test Reminder feature, the date, time and strip
symbol will be displayed. The Test Reminder
symbol will also flash. The display sample is
shown below.
Note:
For any step of the set up, if the left (◄)
button is pressed and held, it will allow a faster
adjustment.
