47
DAS-208SA Disk Array User Guide
4.1.2 Quick Setup via Terminals or PCs
Do the following steps to quickly set up your DAS-208SA via a terminal or PC.
Step 1
Connect one end of the supplied RS-232 cable to the COM port of
your terminal or PC, and the other end to Console port.
Step 2
Plug the multiport cable to the port marked as “AUX” at the rear of
the disk array.
Step 3
From the windows desktop click on
Start> Programs>
Accessories> Communications> Hyper Terminal
to connect
your terminal to the disk array. See Figure 4-8
Figure 4-8