19
DAS-208SA Disk Array User Guide
3.3.2 Operation Mode
Operation mode continuously reports the operating status of the disk array and
the drives connected to it. During normal operation, the LCD display will
continuously show the status of all the major components. Note that the last
character on the second line of the LCD panel with a tiny square moving up
and down, to indicate that the DAS-208SA
Disk Array is in operation.
3.3.3 Configuration Mode
Configuration mode is used to modify the settings of disk array. Users can
configure theDAS-208SA either through the LCD panel or via a terminal. Note
that you are entering the configuration mode whenever you are pressing the
SEL
button during the Operation Mode. If you wish to enter to the configuration
mode from a terminal, simply use the “TAB” key to take you to your desired
mode.
1.
You cannot enter the configuration Mode from LCD panel and
Terminal at the same time.
2.
You will be prompted to enter your password if the
password-checking feature is enabled. Provide the correct password
to continue your configuration.
Unless the disk array is running the self-diagnose mode, you may select any of
the configuration modes at any time. The configuration mode of DAS-208SA is
completely menu-driven for the ease of use. And the menu options allow you to
fine-tune disk array to your specific configuration.
