17
E
N
G
L
IS
H
zoopa Glider 75
Install the aileron (4-CH)
!
In the RTF version the aileron is not supported by the controller as it comes with 3 channels only.
7
8
Install the servo horn of the aileron by screw.
Connect the push rod to the aileron horn and make sure the ailerons are balanced.
9
The plane fully assembled as shown in
the figure.
Center of Gravity
The ideal C.G. position is 30 mm behind the leading edge measured at where the wing meets the fuselage. The C.G. has a great effect on
the way of the model flight.
3 cm
