16
E
N
G
L
IS
H
zoopa Glider 75
Assemble the Plane
1
2
Install the servo horn of the vertical and horizontal tail by screw.
Cut out the foam of the hole in the end of the tail.
3
Insert the horizontal tail to the
corresponding gap of the tail.
4
Connect the push rod wire with the
control surface of the vertical and
horizontal tail by the clevis.
5
6
Fix the tail by a long corresponding screw.
Insert the wing to the corresponding
hole of the fuselage. Make sure the wing
is fix vertically with the fuselage.
