ACME Zoopa 350, Instruction Manual

Page: 21 / 36

21
zoopa 350
EN
G
LI
SH
TRIM / ADJUST
If the helicopter turns or drifts to one side after start, you can adjust the movements with the trims.
Move the corresponding trims against the drift movements as shown below.
DRIFT ROTATION TO THE RIGHT (SHEER TRIM)
if the helicopter is turning right, press the digital sheer trim button to
the left until the result is satisfying.
DRIFT ROTATION TO THE LEFT (SHEER TRIM)
if the helicopter is turning left, press the digital sheer trim button to
the right until the result is fine.
DRIFT BACKWARDS
if the helicopter is moving backwards, press the digital nick trim
button to the top until the helicopter stops moving backwards.
DRIFT FORWARDS
if the helicopter is moving forward, press the digital nick trim button
downwards until the helicopter stops moving forward .
DRIFT RIGHT (ROLL)
if the helicopter pans right, press the digital roll trim button to the
left.
DRIFT LEFT (ROLL)
if the helicopter pans left, press the digital roll trim button to the
right.
! !
Attention!should!be!paid!to!the!fact,!that!4-Channel!helicopters!tend!to!drift!away!into!one!direction.!This!drift!can!only!
be!minimized!by!countersteering!with!the!controller!at!all!time.