5
11. SLAVE
On
Slave Mode
12. SOUND
Flashing
Sound activation
13. SPEED:
Manually adjusts strobe speed. (Left to right, the speed is from slow to fast)
Note:
To activate the manual
DIMMER
and
SPEED
controls, scroll through the MENU and
ENTER
mode then select
(Manual), the manual controls will function
only in this mode.
14. DIMMER:
Manually adjusts dimmer. (Left to right, the brightness is from min to max)
15. MICROPHONE:
Receives music signal for sound active mode.
16. ONLY FOR REMOTE CONTROL:
Connects to the optional CA-‐8 to control the unit in Stand-‐by,
Function and Mode
17. DMX INPUT:
DMX 512 link, use a 3-‐pin XLR cable to link the unit and DMX controller,
18. DMX OUTPUT:
DMX 512 link, use a 3-‐pin XLR cable to link to the next unit.
3.2 Main Functions
To select any of the given functions, press the
MENU
button up to the required selection as
shown on the display. Select the function by pressing the
ENTER
button and the display will blink.
Use the
DOWN
/
UP
buttons to change the mode. Once the required mode has been selected,
press the
ENTER
button to confirm. To go back to the main functions without any changes press
the
MENU
button again. Press and hold the
MENU
button for about one second or wait for 7
seconds to exit the current mode.
The main functions are shown overleaf:
Summary of Contents for LED STROBE 50
