10
4. How To Control The Unit
You can operate the unit in three ways:
1. Master/slave built-‐in preprogram function
2. Easy controller (optional CA-‐8)
3. Universal DMX controller
You do not need to turn the unit off when you change the DMX address, the new DMX address
setting will take effect immediately.
4.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to give an
automatic, sound activated, synchronized light show. This function is good when you want an
instant show. You have to set the first unit in master mode and select
(random show) or
(show 1) or… or
(show 12) mode. Any other units will have to be set in slave mode
and select
(normal) or
(2-‐light show) mode.
2-‐light show
In
(slave mode),
means the unit works normally and
means 2-‐light show. In order to create a great light show, you can set
on
the second unit to get contrast movement to each other.
4.2 Easy Controller CA-‐8
The CA-‐8 remote control is used only in master/slave mode. By connecting to
the 1/4” jack socket of the first unit. You will find that the remote control in the first unit will
control all the other units for Stand by, Function and Mode selection.
Blackout
Blackout the unit
Function
Synchronous Strobe by auto
Synchronous Strobe by sound
(press and hold the button)
Select Show 1 – 12
Manual mode
Mode
Sound
(LED OFF)
Show
(LED ON)
Summary of Contents for LED STROBE 50
