16. ONLY FOR REMOTE CONTROL:
Connecting with CA-8 to control the unit for Stand by,
Function and Mode function.
17. DMX INPUT:
For DMX512 link, use 3-pin XLR cable to link the unit together.
18. DMX OUTPUT:
For DMX512 link, use 3-pin XLR plug cable to link the next unit.
3.2 Main Function
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the mode. Once the required mode has been selected, press the
ENTER
button to confirm, to go back to the main function without any change press the
MENU
button
again. Hold and press the
MENU
button about one second or wait for 7 seconds to exit the current
mode.
The main functions are showing below:
6A
