LED-HC101 II
2.Technical Specifications
y
A compact LED controller for all kinds of DC 24V passive RGB Fixtures.
y
Come with switch power supply inside
y
Built-in programs under Master/Slave mode triggered by music.
y
4 different ways of DMX addressing
y
Terminals for linking LED-Wall Dimmer, and it provides power to LED Wall Dimmer.
y
Power input:
120-240V~50/60Hz
y
Power output:
DC 24V
y
Max Load
：
100W
y
Channels
Channel 1 = Red
Channel 2 = Green
Channel 3 = Blue
Channel 4 = Dimmer / Strobe
y
Dimension
：
356 x 132 x 43 mm
y
Weight
：
2kg
3. Function
1. DMX INTPUT: input DMX signal
2. DMX OUTPUT: output DMX signal
3. POWER SOCKET: for power input
4. LED: show the status of the unit
5. DIP SWITCH: used to set the start address of the unit or choose functions
6. AUTO DMX ADDRESS: used to set start address automatically.
7. LED-WD CONNECTOR: used to receive the signal of LED-WD only
8. SIGNAL OUTPUT: output signal and power for light
LED-HC101 II
C. Master/Slave operation
The fixture will allow you to link 16
fixtures together and operate without a controller.
In Master/Slave mode, the first fixture will control the others to give an automatic,
sound activated, synchronized light show. This function is good when you want an
instant show. The first fixture it’s DMX input cable will have nothing connect it, and
the other fixtures will be set in slave mode automatically. Their DMX input cables
connect the last fixture DMX output cable (daisy chain). Any fixture can act as a
Master or as a Slave
3A
8A
