ACME Color Par 36, User Manual

Page: 10 / 20

DOWN / UP button to select the (master slave mode) or (blackout mode). Once the
mode has been selected, press the ENTER button to setup, to go back to the functions without any
changes press the MENU button again. Hold and press the MENU button for one second or wait
for one minute to exit the menu mode.
（
LED Display
）
To select the , press the ENTER button to show the LED DISPLAY on the display. Use the
DOWN / UP button to select the (LED display on) or (LED display off) mode. Once
the mode has been selected, press the ENTER button to setup, to go back to the functions without
any changes press the MENU button again. Hold and press the MENU button for one second or
wait for one minute to exit the menu mode.
（ Display ）
To select the , press the ENTER button to show the DISPLAY on the display. Use the
DOWN / UP button to select the (normal) or (display inversion). To go back to the
functions without any changes press the MENU button again. Hold and press the MENU button for
one second or wait for one minute to exit the menu mode:
Display normal mode for the fixture putting on the floor;
Display inversion mode for the fixture fixing under ceiling.
（
White Balance
）
To select the , press the ENTER button to show the DIMMER SPEED on the display. Use the
DOWN / UP button to select the
（
red
）
,
（
green
）
or (blue) mode.Once the
mode has been selected, press the ENTER button to setup, use UP/DOWN button to adjust the
value 125-255, to go back to the functions without any changes press the MENU button again.
Hold and press the MENU button for one second or wait for one minute to exit the menu mode.
9B