7. Do not touch the surface of the gobo with bare fingers. The gobo has a small position point at its
edge which has to aim at the position point on the gobo holder as L shows (glossy side towards the
light source).
8. Insert the gobo holder back into the rotating gobo wheel component in this way that its position
point has to exactly aim at the center of the rotating gobo wheel.
9. After installation, put the component back to the fixture.
5. How To Set The Unit
5.1 Main Function
Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by pressing the ENTER button.
Use the UP/DOWN button to choose the submenu, press the ENTER button to store and
automatically return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit
menu mode.
The main functions are shown below:
10A
