3. Control Panel
Power Cord Version:
Powercon Version:
1. Display:
To show the various menus and the selected function
2. Button:
MENU
To enter into move backward or leave the menu
UP
To go backward to move up in the menu
DOWN
To go forward to move down in the menu
ENTER
To perform the desired functions
3. FIRMWARE UPGRADE:
Used to upgrade the fixture’s firmware
4. BATTERY DISPLAY
5. ETHERNET:
Transfers fixture’s information to a main controller
6. DMX IN:
For DMX512 link, use 3/5-pin XLR cable to link the unit and DMX controller to input DMX signal
7. DMX OUT:
For DMX512 link, use 3/5-pin XLR cable to link the next units to output DMX signal
8. POWER(Power Cord Version):
To connect to supply power
9. POWER SWITCH:
To turn on/off the power
10. POWERCON IN(Powercon Version):
To connect to supply power
11. POWERCON OUT(Powercon Version):
To connect to the next fixture
6A
