Acksys WLg-IDA/NP[H4], Quick Installation Manual

Page: 16 / 20

-6-
When installing a new C-KEY, be sure that the flattening looks to the rear of
the product, then carefully insert the device in the opening, vertically.
DIN RAIL MOUNTING
The product is shipped with a 35 mm DIN rail clip. To insert the product on
the rail, tilt slightly the device and pull it firmly upward to put the rail in
pressure on the lower slot of the clip, as shown on the picture below, and
then push the upper side of the clip onto the rail with a rotating movement.
To remove the product from the rail, proceed inversely in the same way: push
the device upward, and then, with a rotating movement, pull the upper side of
the clip out of the rail, then release the lower side of the clip.