Acksys WLg-IDA/NP[H4], Quick Installation Manual

Page: 20 / 20

-10-
Mechanical characteristics
Dimensions (without antennas) L x l x h = 4.33 x 4.72 x 1.97 in
Weight 1.25 lbs (570 g)
Enclosure IP 30
Extended operating
temperatures
-13°F to +158°F (-25°C to +70°C)
Status indicators
13 LEDs: Power1, Power2, DIAG, C-
KEY, WLAN, WLan level bargraph,
10/100 LAN1 & 2, LINK Tx/Rx LAN1 & 2
Push button
Short push (< 2 sec.): Reset
Long push (> 2 sec.): Restore factory
settings
Software
Device configuration
Automatic device discovery
Built in web based utility for easy
configuration from any web browser
(username/password protection)
Firmware upgrade Yes (via web browser or NDM)
SNMP SNMP V1, V2C
Operating mode AP (Access Point) or Bridge/Client
AP mode only
Network topology Infrastructure mode with or without WDS
Security
WEP, WPA-PSK/WPA2-PSK, WPA/
WPA2 with 802.1x authenticator, MAC
address filter, SSID visibility status.
Only WEP is available if WDS enabled
Client/Bridge mode only
Network topology
Infrastructure mode
Ad-hoc mode
Security
WEP, WPA-PSK, WPA2-PSK
802.1x EAP-PEAP-MSCHAP V2
Regulatory compliance
The unit conforms to the following european council Directives:
N° Title
1999/5/CE
Radio and Telecommunications Terminal Equipment
Directive (R&TTE)
The device has been certified to comply with the following directives:
N° Title
EN301-489-17 EMC for radio equipment 2.4Ghz & 5GHz
EN 300 328
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Wideband transmission systems, 2.4
GHz ISM band
EN 301 893
Broadband Radio Access Networks (BRAN);
5 GHz high performance RLAN
EN 60950 Security of information technology equipment