background image

Automation Components, Inc.

2305 Pleasant View Road  |  Middleton, WI 53562

Phone: 

1-888-967-5224  |  

Website:

 workaci.com

Page 7

Version: 22.0

I0000756

PRODUCT SPECIFICATIONS

Supply Voltage:

4 to 20 mA Output:

 250Ω Load: 18 to 36 VDC  |  

500Ω Load:

 20 to 36VDC | 

0 to 5 / 0 to 10 VDC Output:

 16 to 36 VDC, 21.6 to 26.4 VAC, 50/60 Hz

Supply Current:

4-20 mA Output:

 24 mA minimum 

0-5 VDC  |  0-10 VDC Outputs:

 6 mA maximum

Output Signals:

2-wire:

 Linear 4-20 mA DC Current (field selectable)  |  

3-wire: 

0-5 VDC; 0-10 VDC 

(default)

Response Time (0-100% FSO):

8 seconds

Output Update Rate:

1 second

Output Load Resistance:

4 to 20 mA:

 500 ohms maximum  |  

0-5 VDC/0-10 VDC: 

5K ohms minimum

Warm Up Time:

15 minutes (wait 15 minutes before zeroing)

Operating Temperature:

Transducer:

 -40-257°F (-40-125°C)  | 

 Electronics/Housing/Cables:

 32-167°F 

(0-75°C)

Compensated Temperature Range:

32 to 140°F (0 to 60°C)

Storage Temperature:

-13 to 176ºF (-25 to 80ºC)

Operating Humidity:

10 to 90% RH non-condensing

Proof Pressure:

A/WPR2-30 Series

 and 

A/WPR2-100 Series:

 3X FS  |  

A/WPR2-300 Series: 

2X FS

Burst Pressure:

1500 psi

Media Types:

Any liquids or gases compatible with Neoprene seal

Process Fitting Material:

304 SS

Process Fitting Size:

1/4"-18 NPT Male; Pressure Snubber included for light oils/water

Transducer Cable Rating 

|

 Connector 

Type:

Type CMP – Plenum Rated (UL Standard 444), NEC Article 800  |  Packard Connector

Metal Clad Rating:

Continuously interlocked Type 304 stainless steel core

Enclosure Rating:

NEMA 4X/IP66

Recommended Torque Specification:

150 in lbs (16.95 Nm)

WARRANTY

The ACI WPR2 Series is covered by ACI’s Five (5) Year Limited Warranty, which is located in the front of ACI’S 

SENSORS & TRANSMITTERS CATALOG or can be found on ACI’s web site: 

www.workaci.com.

W.E.E.E. DIRECTIVE 

At the end of their useful life the packaging and product should be disposed of via a suitable recycling 

centre. Do not dispose of with household waste. Do not burn.

Summary of Contents for WPR2 Series









Reviews: