MOD9000LON Receiver Installation & Configuration
AUTOMATION COMPONENTS, INC Version : 1.0
2305 Pleasant View Road I0000675
Middleton, Wisconsin 53562
Page 12 of 33
www.workaci.com
(888) 967-5224
•
Again use the mouse to move to the next column. Enter a GROUP NAME for the data
set by typing the group name in the cell.
Enter the name in the cell by using the mouse to click on the next column.
Note: DO NOT use commas or semicolons in the Group Name.
•
Enter a POINT NAME for the data point by typing the name in the cell.
Enter the name in the cell by using the mouse to click on the next column.
Note: DO NOT use commas or semicolons in the Point Name.
•
Assign a sensor/transmitter to the data register by clicking in the TRANSMITTER ID
cell to open a drop down menu. Use the scroll bar to scroll to the correct address or
automatically scroll to the address by typing the hexadecimal address in the cell. To
select the address, click on the appropriate ID in the drop down menu. Each ACI
transmitter is factory configured with a unique ID – refer to the sensor product data sheet
for the location of the transmitter ID.
