B5C Operation And Maintenance Manual
85950-301-000 RA
Aug. 05, 2016
21
3.11 Menu “8_BUZZER STYLE”
The buzzer style is almost identical to that of the relays, except the style that represents
the buzzer tone options:
Tone 1: Chirp once.
Tone 2: Chirp twice.
Tone 3: Intermittent 50% duty cycle.
Tone 4: Continuous.
The menus are identical to those for the Relay Style.
3.12 Menu “A_ALL DISABLE”
This function is for calibration, system testing etc. When All Disable is ON, the status of
the relay, buzzer and analog output, etc., will freeze in their current state.
Default is OFF.
3.13 Menu “B_SIMULATION”
Simulation mode is used to assist in testing the installation before commissioning. When
simulation is enabled, the unit will not detect gas concentrations; it will display the
simulated value and use it to calculate the status of relays and buzzers. This feature is
available for evaluating the user settings and testing the installation (e.g.: the activation of
the valve, fan speed, relay set points, etc. can be verified.)
Any concentration between 0ppm and 9999ppm can be simulated.
3.14 Menu “C_SITE SERVICE” and “D_FACTROY SET”
Factory service staff access only. The customer has no need to operate it.
4. BACnet PIC Statement Supported By B5C
See document: 85950-103-000 (B5 PIC Statement).
4.1 Smart Sensor Assembly Replacement
4.1.1
Disassembling
Observe all safety and electrical codes and regulations before removing enclosure lid.
