14
15
GENERAL TROUBLESHOOTING
PROBLEM
SOLUTION
Upright assembly is too wide or narrow to
fit snug in between rails.
A. Loosen cross bar mounting bracket,
adjust uprights to required location,
tighten cross bar mounting bracket.
Cross bar bows up or down
A. Check weight. Do not exceed weight
rating.
B. Check bolts are not loose.
C. Loosen cross bar mounts and adjust
uprights to required location.
D. Cross bar may be damaged and
require replacement.
Uprights are uneven
A. Ensure base of uprights are equal
distance from closest end of box.
Tailgate has trouble closing
A. Adjust rack rails forward.
NOTE:
Do not allow rack rail to pass front
edge of box.
Uprights interfere with opening or closing
LOMAX™ Folding Hard Cover on
ADARAC™ Aluminum Pro Series
A. Adjust uprights evenly outward on
cross bar until LOMAX™ opens and
closes without obstruction.
INSPECTION AND MAINTENANCE
The consumer can perform most of inspection and maintenance. It may be necessary
to review instructions.
•
Periodically inspect condition of all parts. Check for loose bolts and parts, tighten if
needed.
•
Replace damaged parts.
NOTE
: Inspection and/or maintenance should also be performed anytime a
malfunction is observed or suspected. If you need assistance inspecting and/or
servicing your ADARAC™ call Customer Service at 866-630-8726. If you want to
order a replacement part, call Customer Service.
Always use original equipment
replacement parts for your ADARAC™.
