Installation
31
5
Installation
5.1
Unpacking
The laser marking device is delivered in a packaging which meets UPS "falling regula-
tions".
From the inside outwards:
•
laser device
DFL
Ventus
Marker
with the components: laser head, supply unit and fiber
laser cable,
•
foam grid,
•
vacuum-tight, welded aluminium foil with desiccant,
•
inner carton,
•
foam corners,
•
outer carton with accessories included in the scope of delivery.
1.
Open the outer carton.
2.
Remove the laser marking device in its packing material and put it down in a safe
place.
3.
Open the top of the inner carton. When doing so, watch the labelling!
4.
Open the foil packing and pull it off.
5.
Carefully remove the fiber laser cable (1) from the foam grid (2) and lay it aside.
1
2
CAUTION
The fiber laser cable can be damaged by incorrect handling.
Do not kink or twist cables, or roll them up too tightly.
Minimum kink radius
75 mm
Minimum loop length
1 m
Maximum distortion by
180 degrees
!
