– 11 –
C R O S S C O U N T R Y S E R I E S S T R A I G H T M O D E L • G R E E N H O U S E I N S T R U C T I O N S
C.
SIDEWALL ASSEMBLY
Each sidewall includes gutters, bars and sidewall Poly Bars.
1.
Lay out the sidewall with the gutter at the top, the base at the bottom, and the sidewall Poly
Bars with the bolt track facing up
(See the sidewall drawing assembly procedure).
2.
Each sidewall Poly Bar has a straight cut and an angle cut. The straight cut fits into the
base/sill and the angle end faces the gutter.
3.
The corner post, with an angle attached to it, is for the backwall
(If you put it in the wrong end,
don’t worry, you can change it after the greenhouse is bolted together)
. Fit the cornerpost into the
base/sill. Then drop the bolt into the notch and fasten it to the base.
4.
Push the Poly Bar up and tighten all the bolts to the gutter. Do the same with the base
5.
For the other sidewall, follow the same procedure, but notice that the cornerpost
)with the
angle attached to it)
will be at the opposite end
(Remember always to face the bolts slot in the Poly
Bar towards you).
sidewall polybar
gutter
base
corner posts
add slider
1
2
3
Summary of Contents for Cross Country Series
Page 1: ...ACF Greenhouses ...
