B.
BACK GABLE-END ASSEMBLY
Lay out the back pieces of the greenhouse into the shape of the end wall (
Refer
to the line drawings page 9, detail pictures page 10).
For the Poly End Rafter Bars,
the flat surface should lie on the ground.
1.
Bolt the bar / sill to bottom of Poly Bar
(Detail #10, page 10).
2.
Fasten the upright Poly Bars to the Roof Poly End Bar using 1/4" x 1/2" bolts
(Roof Poly End
Bars have at least 1 small angle attached to it. Detail #9, page 10).
3.
Cross brace angle is bolted approx. 54" from the base. At this time it is not important to be
exact. When the greenhouse gets assembled you will see the height of the cross brace by
attaching the end of it to the angle that is attached to the corner Poly Bar
(Detail #11, page 10).
Back Gable End Line Drawing Assembly Procedure
– 9 –
C R O S S C O U N T R Y S E R I E S S T R A I G H T M O D E L • G R E E N H O U S E I N S T R U C T I O N S
Cross Brace Angle
Poly Bars
Roof Bars
Base
1
2
3
4
GROUND
Summary of Contents for Cross Country Series
Page 1: ...ACF Greenhouses ...
