![background image](http://html.mh-extra.com/html/acer/veriton-hornet-n260g/veriton-hornet-n260g_service-manual_6344057.webp)
51
Boot
Message Displayed
Description
Boot Failure ...
This is a generic message indicating the BIOS could not boot from a
particular device. This message is usually followed by other
information concerning the device.
Invalid Boot Diskette
A diskette was found in the drive, but it is not configured as a
bootable diskette.
Drive Not Ready
The BIOS was unable to access the drive because it indicated it was
not ready for data transfer. This is often reported by drives when no
media is present.
A: Drive Error
The BIOS attempted to configure the A: drive during POST, but was
unable to properly configure the device. This may be due to a bad
cable or faulty diskette drive.
B: Drive Error
The BIOS attempted to configure the B: drive during POST, but was
unable to properly configure the device. This may be due to a bad
cable or faulty diskette drive.
Insert BOOT diskette
in A:
The BIOS attempted to boot from the A: drive, but could not find a
proper boot diskette.
Reboot and Select
proper Boot device or
Insert Boot Media in
selected Boot device
BIOS could not find a bootable device in the system and/or
removable media drive does not contain media.
NO ROM BASIC
This message occurs on some systems when no bootable device
can be detected.
Storage Device
Message
Displayed
Description
Primary Master
Hard Disk Error
The IDE/ATAPI device configured as Primary Master could not be
properly initialized by the BIOS. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
Primary Slave
Hard Disk Error
The IDE/ATAPI device configured as Primary Slave could not be properly
initialized by the BIOS. This message is typically displayed when the
BIOS is trying to detect and configure IDE/ATAPI devices in POST.
Secondary Master
Hard Disk Error
The IDE/ATAPI device configured as Secondary Master could not be
properly initialized by the BIOS. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
Summary of Contents for Veriton Hornet N260G
