53
Incompatible
trying to detect and configure IDE/ATAPI devices in POST.
Primary Slave
Drive - ATAPI
Incompatible
The IDE/ATAPI device configured as Primary Slave failed an ATAPI
compatibility test. This message is typically displayed when the BIOS is
trying to detect and configure IDE/ATAPI devices in POST.
Secondary Master
Drive - ATAPI
Incompatible
The IDE/ATAPI device configured as Secondary Master failed an ATAPI
compatibility test. This message is typically displayed when the BIOS is
trying to detect and configure IDE/ATAPI devices in POST.
Secondary Slave
Drive - ATAPI
Incompatible
The IDE/ATAPI device configured as Secondary Slave failed an ATAPI
compatibility test. This message is typically displayed when the BIOS is
trying to detect and configure IDE/ATAPI devices in POST.
3rd Master Drive -
ATAPI
Incompatible
The IDE/ATAPI device configured as Master in the 3rd IDE controller
failed an ATAPI compatibility test. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
3rd Slave Drive -
ATAPI
Incompatible
The IDE/ATAPI device configured as Slave in the 3rd IDE controller
failed an ATAPI compatibility test. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
4th Master Drive -
ATAPI
Incompatible
The IDE/ATAPI device configured as Master in the 4th IDE controller
failed an ATAPI compatibility test. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
4th Slave Drive -
ATAPI
Incompatible
The IDE/ATAPI device configured as Slave in the 4th IDE controller
failed an ATAPI compatibility test. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
5th Master Drive -
ATAPI
Incompatible
The IDE/ATAPI device configured as Master in the 5th IDE controller
failed an ATAPI compatibility test. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
5th Slave Drive -
ATAPI
Incompatible
The IDE/ATAPI device configured as Slave in the 5th IDE controller
failed an ATAPI compatibility test. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
6th Master Drive -
ATAPI
Incompatible
The IDE/ATAPI device configured as Master in the 6th IDE controller
failed an ATAPI compatibility test. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
6th Slave Drive -
The IDE/ATAPI device configured as Slave in the 6th IDE controller
Summary of Contents for Veriton Hornet N260G
