manualshive.com logo in svg

Acer Veriton 7600GTR, Service Manual

Share
Download
Acer Veriton 7600GTR Service Manual Download Page 43

Chapter 2

34

MPS Version Control For OS

This field allows you to select which MPS (Multi-
Processor Specification) version to be used for the 
operating system.

1.4

1.1

OS Select For DRAM > 64MB

This item is only required if you have installed more 
than 64MB of memory and you are running the OS/
2 operating system.

Non-OS2

OS2

HDD S.M.A.R.T. Capability

The S.M.A.R.T (Self-Monitoring, Analysis, and 
Reporting Technology) system is a diagnostics 
technology that monitors and predicts device 
performance.

Enabled

Disabled

Report No FDD for WIN 95

For compatibility with Windows 95 logo certification, 
select Yes to release IRQ6 when the system 
contains no floppy drive. When this setting is set to 
Yes, users have to select Disabled for the Onboard 
FDC Controller in the Integrated Peripherals menu.

No

Yes

Full Screen LOGO Show

This item enables you to show the company logo on 
the bootup screen.

Enabled

: Shows a still image (logo) on the full 

screen at boot.

Disabled

: Shows the POST messages at boot.

Enabled

Disabled

Parameter

Description

Options

Summary of Contents for Veriton 7600GTR









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands