73
Chapter 5
Connectors
Chassis Intrusion Switch Connector:
This connector is connected to a 2-pin chassis switch. If the chassis is opened, the switch will be short. The
system will record this status and show a warning message on the screen. To clear the warning, you must
enter the BIOS utility and clear the record.
Serial ATA Connectors:
Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA
and install the proper driver in order to work properly.
Front Panel Connectors: F_PANEL
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis
front panel to the F_PANEL connector according to the pin assignment below.
Illustration
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
JCI1
1
2
CINTRU
GND
