Chapter 2
25
Parameter
Description
Options
Hard Disk Boot Priority
Press [Enter] to enter the sub menu to select
Hard Disk Boot Device Priority.
Use
wx
to select a device, then
press<+> to move it up, or < - > to
move it down the list.
Virus Warning
This feature allows you to enable the VIRUS
warning function for IDE Hard Disk boot sector
protection. If this function is enabled and there
is someone attempt to write data into this area,
BIOS will show a warning message on screen
and the alarm will beep.
Enabled
Disabled
Silent Boot
This features allows you to enable or disable if
the screen logo to display or no during POST
Enabled
Disabled
Quick Power On Self Test
This feature allows the system to skip certain
tests while booting. When this function is
enabled, it will decrease the time needed to
boot the system, which means to quick power
on self test function
Enabled
Disabled
First / Second / Third Boot
Device
The item allows you to set the sequence of boot
device where BIOS attempts to load the disk
operating system.
Floppy
, LS120, Hard Disk, CD-ROM,
ZIP, USB-FDD, USB-ZIP, USB-
CDROM, USB-HDD, LAN, Disabled
Boot other Devices
This item allows you to enable or disable to boot
from other device
Enabled
Disabled
Boot Up NumLock Status
This item allows you to enable or disable to set
keyboard is number keys or arrow keys
Enabled
Disabled
Gate A20 Option
This option is used to set up the A20 signal
control necessary for access to the 1MB
memory.
Fast
: Let chipset control Gate 20
Normal : A pin in the keyboard
controller
Security Option
Select whether the password is required every
time the system boots or only when you enter
setup.
System
Setup
Configuration Table
This feature allows you to enable or disable if
showing summary screen or not
Enabled
Disabled
Hidden Setting Description
APCI Mode
This option is used to set up enable or disable
the APCI funtion
Enabled
Disabled
Bootblock Write Protect
Enabled
Disabled
