Ofrecido por www.electromanuales.com
18
Conference
The maximum number of parties allowed during a conference
(multi-party) call varies, depending on the network you choose.
* End call
During a multi-party call, you can end the call on one of the parties by
selecting this function
* Swap
This function is available when you have both active and held calls.
Swap
transfers the active call to hold and vice versa, so that you may converse
with the other party.
* Hold
This function allows you to put a currently active call on hold, so that you
can initiate a new call. After a call is put on hold, “ 1” will appear on the
screen, and when the second call is connected, “ 1” will pop up.
Note: The figure next to the hold “ ”/active “ ” icon (in the example
above it is “1”) indicates the number of hold/active calls.
* Unhold
Once you end the new call while holding an old call, the old call can be
made active again by selecting this function.
* Join
This function can let you make a conference call.
* Private
During a conference call, you can use this function to talk privately with one
participant.
* Messages
You can read or write messages with this function. Please refer to page 27 for
details.
