Ofrecido por www.electromanuales.com
41
Line in Use (3-5)
This function allows you to use two different telephone numbers for one single
phone. You can designate the number used to make a call and use both of these
numbers simultaneously to receive calls without having to use two phones to do
so. This function is only available if your network service provider provides such
service.
After you enter this item, you can press to choose the number (Line 1 or Line
2), then press
to confirm. The number you selected (Line 1 or Line 2 )
will appear on the screen while in standby mode.
Next Call (3-6)
Your phone can receive voice, data and fax calls. Depending on your network
service provider, you may have to select among the voice, data and fax calls under
this option before you can receive them correctly. This scenario only applies to
one-number scheme network service providers (i.e., the voice, data and fax calls
are all transmitted via a single telephone number).
Consult your network service provider to decide if you need to do such setting.
Voice
(3-6-1)
Press
to set the next call as a voice call (This is the default setting).
Data
(3-6-2)
Press
to set the next call as a data call.
Fax
(3-6-3)
Press
to set the next call as a fax call.
After you receive a data or fax call, you need to change the setting back to “voice”
in order to receive ordinary voice calls.
Show Number (3-7)
You can decide whether or not to show your number on the receiver’s phone when
you make a call.
Press
to display the following options:
Preset
(3-7-1)
Whether or not the receiver’s phone will display your number depends on
the default setting on the network side.
