Acer V750 User Manual Download Page 63

Page: 63 / 76

Ofrecido por www.electromanuales.com

4.7

Audio Setting (7)

You can adjust the audio settings of your phone here.

Ring Volume (7-1)

You can select the ring volume level here. A total of five levels are available.
After you enter this item,

will appear. Press to change the ring

volume level. Finally, press

to confirm.

Ring Type (7-2)

You can choose the ring type of your phone from 8 ring types, 20 melodies

and 2 vibration types.
After you enter this item, press to choose the ring type to be used.
Finally, press

to confirm.

Note

: Vibration types are “vibration only” and “vibration followed by

ringing”.

Keypad Tone (7-3)

This setting determines whether keypad tones will be sounded.
After you enter this item, press to choose from “On” or “Off”. Finally,
press

to confirm.

Alarm Type (7-4)

You can set the alarm type here.
After you enter this item, press to choose the alarm type to be used.
Finally, press

to confirm.

Summary of Contents for V750













































































Search results

Summary of Contents for V750

Reviews:

Related manuals for V750

Brands by name

Popular brands

Acer V750, User Manual

Search results

Summary of Contents for V750

Reviews:

Related manuals for V750

Brands by name

Popular brands