background image

iv

Safe listening

To protect your hearing, follow these instructions.

  Gradually increase the volume until you can hear it clearly and comfortably and without distortion.

  After setting the volume level, do not increase it after your ears have adjusted.

  Limit the amount of time listening to music at high volume.

  Avoid turning up the volume to block out noisy surroundings.

  Turn the volume down if you can't hear people speaking near you.

Warnings

  Do not use this product near water.

  Do not place this product on an unstable cart, stand or table. If the product falls, it could be 

seriously damaged.

  Slots and openings are provided for ventilation to ensure reliable operation of the product and to 

protect it from overheating. These openings must not be blocked or covered. The openings should 
never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product 
should never be placed near or over a radiator or heat register, or in a built-in installation unless 
proper ventilation is provided.

  Never push objects of any kind into this product through cabinet slots as they may touch 

dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill 
liquid of any kind onto or into the product.

  To avoid damage of internal components and to prevent battery leakage, do not place the product 

on a vibrating surface.

  Never use it under sporting, exercising, or any vibrating environment which will probably cause 

unexpected short current or damage internal devices.

Using electrical power

  This product should be operated from the type of power indicated on the marking label. If you are 

not sure of the type of power available, consult your dealer or local power company.

  Do not allow anything to rest on the power cord. Do not locate this product where people will 

walk on the cord.

  If an extension cord is used with this product, make sure that the total ampere rating of the 

equipment plugged into the extension cord does not exceed the extension cord ampere rating. 
Also, make sure that the total rating of all products plugged into the wall outlet does not exceed 
the fuse rating.

  Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall 

system load must not exceed 80% of the branch circuit rating. If power strips are used, the load 
should not exceed 80% of the power strip's input rating.

  This product's power cord is equipped with a three-wire grounded plug. The plug only fits in 

a grounded power outlet. Make sure the power outlet is properly grounded before inserting 
the power cord plug. Do not insert the plug into a non-grounded power outlet. Contact your 
electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not 
properly grounded may result in electric shock and/or injury.

Summary of Contents for V226HQL























Reviews: