2
The display support is aligned with the corresponding slot of the base,firmly installed on the base;
Align the rotating shaft above the support with the corresponding slot below the monitor and install
it firmly on the monitor.
Installing monitor
1. Remove the monitor bracket and base from the packaging and place it on a stable and level
workspace.
2.
(As shown below)
Power saving
The monitor will be switched to "power saving" mode by the control signal from the display
controller, as indicated by the orange-colored power LED.
Model
LED light
On
Green
Power saving
Orange
The power saving mode will be kept until a control signal has been detected or the keyboard or
mouse is activated. The recovery time from "power saving" mode back to "on" is around 3 seconds.
Display Data Channel (DDC)
To make installation easier, so long as your system supports the DDC protocol, the monitor is able
to plug-and-play. The DDC is a communication protocol through which the monitor automatically
informs the host system about its capabilities; for example, supported resolutions and corresponding
timing. The monitor supports the DDC2B standard.
3. Support wall hanging function, VESA100*100mm, M4*10 screws
.
