11
EN
EN
Car mount kit installation reminders
Install the Car pedestal on the surface of your vehicle:
•
That is smooth, flat and free of dirt and oil
•
Where the driver can easily view/reach it without taking his/her eyes off too far from the road
•
Where the device will not obscure car controls nor restrict the driver's view of the road
•
Far from the air bag deployment area
To set up the device on your vehicle:
This section shows how to install the Car mount kit in your vehicle's windshield using the suction cup. For
dashboard installation procedures using the self adhesive power disc connector refer to the Acer v200 Series
Travel Companion Starter Guide.
1
Clean the mounting surface with a glass cleaner and a clean cotton cloth.
2
If the ambient temperature is below 15°C (60°F) warm the mounting area and the suction cup (e.g. with a
hair dryer) to ensure a strong suction bond.
3
Install the Car pedestal on the selected area.
a
Fix the suction cup to the selected area with the locking lever facing up.
b
Flip the locking lever away from you to create a vacuum between the suction cup and the mounting
surface.
c
Make sure that the suction bond is strong enough before proceeding to the next step.
d
Insert the pegs on the Car pedestal's cradle plate to the holes on the back of the car cradle, then move
the car cradle in the directions shown, until both parts are engaged.
