Chapter 3
87
17.
Turn the LCD panel over, then detach the acetic tapes holding the FPC cable to the edge of the LCD
panel and detach the acetic tape securing the FPC connector.
18.
Disconnect the FPC cable from the LCD panel.
Removing the LCD Brackets
1.
See “Removing the Battery Pack” on page 51.
2.
See “Removing the SD Dummy Card” on page 51.
3.
See “Removing the Express Dummy Card” on page 52.
4.
See “Removing the Lower Cover” on page 53.
5.
See “Removing the Fan Module” on page 60.
6.
See “Removing the CPU Heatsink Module” on page 61.
7.
See “Removing the CPU” on page 62.
8.
See “Removing the Middle Cover” on page 63.
9.
See “Removing the Keyboard” on page 64.
10.
See “Removing the LCD Module” on page 67.
11.
See “Removing the LCD Bezel” on page 83.
12.
See “Removing the Inverter Board” on page 84.
13.
See “Removing the LCD with Brackets” on page 85.
SG_TM4720_4320_Book.book Page 87 Friday, April 20, 2007 11:14 AM
Summary of Contents for TravelMate 4720 Series
