Acer TravelMate 310 User Manual Download Page 98

Page: 98 / 130

Notebook Manager

User’s Guide

Power Management

Power Management is used to set various settings related to
power management.

This includes the following power-saving-related features:

❑

Enable Heuristic Power Management. Select to enable
heuristic power management. See “Power Management”
on page 39 for more information on heuristic power
management.

❑

Enable display always on. Select to leave your display
always turned on, useful when you need to make
presentations on your computer.

❑

Enable modem ring resume on indicator. Select to allow
the computer to wake-up from standby mode when an
incoming modem ring is detected.

❑

Enable battery low warning beep. Select to allow the
computer to give off warning beeps when the computer
runs low on battery.

❑

Enable sleep upon battery low. Select to allow the
computer to enter standby or hibernation mode when
the computer runs low on battery.

310-e.book Page 78 Tuesday, October 27, 1998 5:17 PM

Summary of Contents for TravelMate 310



































































































































Search results

Summary of Contents for TravelMate 310

Reviews:

Acer TravelMate 310, User Manual, Page: 98 / 130

Search results

Summary of Contents for TravelMate 310

Reviews: