![background image](http://html1.mh-extra.com/html/acer/supra-818pd/supra-818pd_operation-manual_3973121070.webp)
818~2040PD
16
44
GRINDING START POINT
SETTING VALUE IN
AUTOMATIC GRINDING
When Y-axis (vertical axis) performs automatic grinding,
the system will calculate the total grinding amount based
on this setting value in combination with the target setting
value shown on the display (40). (Normally set at 0)
45
POSITION DATA SETTING
DISPLAY KEY FOR Y-AXIS
(SPINDLE HEAD) AUTOMATIC
GRINDING
When this key is pressed, the screen will change to
various positions data setting display when Y-axis
(spindle head) is set for automatic grinding mode.
46
SYSTEM MESSAGE DISPLAY
KEY
When this key is pressed, the screen will change to
system message display. (In case the system
malfunction occurs, error message will be shown on this
display. This provides operator a reference when making
trouble shooting).
47
MACHINE CONTROL INPUT /
OUTPUT SIGNAL
MONITORING DISPLAY
When this key is pressed, the screen will change to the
machine control input / output signal monitoring display.
(This display indicates the machine control input / output
signal conditions, providing the maintenance personnel a
diagnosis reference)
48
SYSTEM PARAMETER
SETTING DISPLAY
When this key is pressed, the screen will change to the
system parameter setting display, which includes various
functions, such as operator parameter, system
management parameter, setting password list, system
date, time setting and screen brightness adjustment, etc.
(All functions on this display are controlled by password).
49
PAGE UP KEY
Press this key for changing to the last page. This key is
invalid for the first page and only one page on the screen.
50
PAGE DOWN KEY
Press this key for changing to the next page. This key is
invalid for the last page and only one page on the screen.
51
RETURN TO POWER ON
DISPLAY
When this key is pressed, the screen will change to the
power on display. The display provides Chinese / English
conversion.
NOTE 1
RETURN TO ORIGINAL
SETTING
1. Turn the mode selector to Y=0.
2. Turn the magnetic chuck selection switch to the
middle position (No demagnetization and no
magnetization)
3. Keep pressing on the button for grinding wheel,
hydraulic, coolant OFF + automatic stop button for 3
seconds, then the control will automatically load the
factory-set parameters.
Summary of Contents for Supra 818PD
