Acer Supra 818PD, Operation Manual

Page: 28 / 238

818~2040 PD
___________________________________________________________________________
4-6
4.5 ELECTRIC WIRING:
a. It’s a power wire for coolant with dust collector unit, which should be connected to a socket
marked with , located at the back side of the electrical cabinet.
b. The power wire of hydraulic system should be connected to a socket marked
with , located at the back side of the electrical cabinet.
c. It’s a power wire for magnetic chuck.
d. These are main power wires of the machine, which should be connected to correct voltage
of power source. It is requested to check if the power wires are connected to the correct
terminals.
e. After power wires have been connected, turn power switch on for checking if motor runs
clockwise or not. If not, you need to change any two of the three-phase power wires (L1, L2,
L3).