manualshive.com logo in svg

Acer Power Sd, User Manual, Page: 55 / 100

Share
Download
Acer Power Sd User Manual Download Page 55

43

Multimedia devices

You can connect multimedia devices such as microphone, earphone or 
headphone, external speakers, audio line-in device and a joystick (for 
games).  These devices will allow you to take advantage of your 
computer’s multimedia features.

Note:

  The multimedia devices shown below are for your 

reference only.  Actual device models may vary in select countries.

Plug the devices in as follows:

Note:

  For information on how to configure multimedia devices,  

consult the documentation that came with each device.

•

microphone:  connects to the Microphone-in jack 

 (pink jack) 

located on the front and rear panel of your computer.

Note: 

 The system has two microphone-in jack (front and rear). 

However, you cannot use both of them at the same time.  By 
default, your system enables the microphone-in jack in front and 
disables the one at the back

.

APSd-ug-en.book Page 43 Thursday, February 7, 2002 4:12 PM

Summary of Contents for Power Sd





































































































Reviews:

No comments