iii
Englis
h
Special notes on
OLED
monitors
The following are normal with the
OLED
monitor and do not indicate a problem.
•
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn
off the power switch and then turn it on again to make sure the flicker disappears.
•
You may find slightly uneven brightness on the screen depending on the desktop pattern
you use.
•
The
OLED
screen has 99.99% or more effective pixels. It may include blemishes of
0.01%or less such as a missing pixel or a pixel lit all the time.
•
Due to the nature of the
OLED
screen, an afterimage of the previous screen may
remain
after switching the image, when the same image is displayed for hours. In this
case, the
screen is recovered slowly by changing the image or turning off the power
switch for a
few hours.
Information for Your Safety and Comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference. Follow all
warnings and instructions marked on the product.
Cleaning your monitor
Please carefully follow these guidelines when cleaning the monitor:
•
Always unplug the monitor before cleaning.
•
Use a soft cloth to wipe the screen and cabinet front and sides.
Connecting/disconnecting the device
Observe the following guidelines when connecting and disconnecting power from the
OLED
monitor:
•
Make sure the monitor is attached to its base before connecting the power cord to the
AC power outlet.
•
Make sure both the
OLED
monitor and the computer are turned off before connecting
any
cable or unplugging the power cord.
•
If the system has multiple sources of power, disconnect power from the system by
unplugging all power cords from the power supplies.
Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible and located as
close to the equipment operator as possible. When you need to disconnect power from the
equipment, be sure to unplug the power cord from the electrical outlet.
