21
Eng
lis
h
Note: This screen capture function is limited by 4:3 aspect ratio only.
Note: For XGA models, to get best quality for you desired image, suggest
end-user set PC resolution to 1024 x 768 before you use this function.
Note: For SVGA models, to get best quality for you desired image, suggest
end-user set PC resolution to 800 x 600 before you use this function.
Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Press
after choosing "Yes" to turn the lamp hour counter to 0 .
Security
Security
This projector provides an excellent security function for the
administrator to manage usage of the projector.
Press
to change the "Security" setting. If the security function
is enabled, you must enter "Administrator Password" first before
changing the security settings.
•
Select "On" to enable the security function. The user has to
enter a password to operate the projector. Please refer to
"User Password" section for details.
•
If "Off"is selected, then the user can turn on the projector
without password.
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set
timeout function.
•
Press
or
to select timeout interval.
•
The range is from 10 minutes to 990 minutes.
•
When the time is up, the projector will prompt the user to
enter the password again.
•
The factory default setting of "Timeout(Min.)" is "Off".
•
Once the security function is enabled, the projector will
request user to enter password when switch on the projector .
Both "User Password" and "Administrator Password" can be
accepted for this dialogue.
