19
Eng
lis
h
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under DVI and Video mode.
Note: "Sharpness" functions is not supported under DVI and Computer
mode.
Rear-Desktop
•
When you select this function, the projector reverses the image
so you can project behind a translucent screen.
Rear-Ceiling
•
When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
H. Position
(Horizontal
Position)
•
Press
to move the image left.
•
Press
to to move the image right.
V. Position
(Vertical Position)
•
Press
to move the image down.
•
Press
to move the image up.
Frequency
"Frequency"changes the projector’s refresh rate to match the
frequency of your computer’s graphic card. If you can see a vertical
flickering bar in the projected image, use this function to make an
adjustment.
Tracking
Synchronizes the signal timing of the display with the graphic card. If
you experience an unstable or flickering image, use this function to
correct it.
Sharpness
Adjusts the sharpness of the image.
•
Press
to decrease the sharpness.
•
Press
to increase the sharpness.
