Acer P1165E Series User Manual Download Page 18

Page: 18 / 57

English

Note:

•

Press "MENU" to launch the

nscreen (OSD) menu, back

to the previous step for the OSD menu operation or exit

the OSD menu.

•

Confirm your selection of items.

PAGE

For computer mode only. Use this button to select the next or

previous page. This function is only available when connected

to a computer via a USB cable.

RGB

Toggle "RGB" to adjust the red/green/blue color.

BRIGHTNESS

Press "BRIGHTNESS" to adjust the brightness of the image.

CONTRAST

Use the "CONTRAST" option to control the difference

between the lightest and darkest parts of the picture.

COLOR

Press "COLOR" to adjust the color temperature of image.

VGA

Press "VGA" to change source to the VGA connector. This

connector supports analog RGB, YPbPr (480p/576p/720p/

1080i), YCbCr (480i/576i) and RGBsync.

COMPONENT

Press "COMPONENT" to change source to Component video.

This connection supports YPbPr (480p/576p/720p/1080i) and

YCbCr (480i/576i).

S-VIDEO

To change source to S-Video.

VIDEO

To change source to COMPOSITE VIDEO.

DVI

Press "DVI" to change source to DVI. This connection supports

digital RGB, analog RGB, YPbPr (480p/576p/720p/1080i),

YCbCr (480i/576i) and HDCP signals.

HDMI™

Change the video source to HDMI™. (for model if with the

HDMI™ connector)

MUTE

To turn on/off the volume.

WIRELESS

This function is not available for this model.

KeyPad 0~9

Press "0~9" to input a password in the "Security settings".

# Icon

Function

Description

Summary of Contents for P1165E Series


























































Search results

Summary of Contents for P1165E Series

Reviews:

Brands by name

Popular brands

Acer P1165E Series, User Manual

Search results

Summary of Contents for P1165E Series

Reviews:

Brands by name

Popular brands