English
-----------------------------------------------------------------------------------------------------------
Note:
If FreeSync
Premium
set "On" you can see the V Frequency to changes in
the OSD.
6.
Refresh rate num: Display the panel’s current refresh rate on the screen.
13
7.
VRB: Choose close, normal or limit.
1.
If FreeSync Premium is "Auto", the VRB option will be automatically set to "Normal".
2.
If FreeSync Premium is "Off", the user can set VRB to one of the following three
settings:
Including: (a) extreme (b) normal (c) closed.
8.
Ultra Low Latency
：
1.
FreeSync Premium is “On”,the Ultra Low Latency is automatically setting to “on”
and gray out.
2.
FreeSync Premium is “Off”,,. Ultra Low Latency can control “On”or”Off”.
Detal function & information,please refer to Acer .Ultra Low Latency specification.
3.
Ultra Low Latency “On”is faster than “Off”
9.
Aim point: Show an Aim point on the screen for shooting games.
5.
Freesync
Premium
:
Select O
n or
O
ff.
FreeSync
Premium
is
available for AMD
supported graphic cards
only
.
----------------------------------------------------------------------------------------------------------
-
Note:
1.
If FreeSync is "On", then the Over Drive selection is set to
"Normal"
automatically
2. If FreeSync is "OFF", then the user can set Over Drive to either one
of the three settings including: (a) Extreme (b) Normal (c) Off.
3. HDMl support "FreeSync".
4. If FreeSync is set to "On", please note that the screen might flicker
during use.
5. The following situations may happen when playing games with
FreeSync enabled:
● Depending on the type of graphic cards, the game settings, and
the video you are playing, a flickering screen may occur. Please try
to set current FreeSync mode to "Off", or visit the official AMD
website to update the graphic card's driver.
● When using FreeSync ,the screen may flicker due to different
output frequencies of the graphics card.
● When FreeSync is set to "On",changing the resolution may result
in screen-tearing. It is recommended to set FreeSync to "Off" and
then change the resolution.
