English
-----------------------------------------------------------------------------------------------------------
Note:
DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
9
.
HDMI Black
L
evel
:
You can select the level of blackness under HDMI source
.
The options
are Normal and Low.
1
0
.
I
nformation
1
5
Quick start mode: Select Off or On. Turn on to speed up boot speed.
Quick start mode: Select Off or On. Turn on to speed up boot speed.
1.
Press MENU key to open OSD.
2.
The basic information of the monitor and the current input source can be viewed
by
selecting the information throughthe up or down key of the rocker.
3.
Restore factory mode:reset all settings to factory default values.
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to
navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
Input: Select the source from HDMI
1
,
HDMI 2
,
D
P
.
5.
Auto Source
:
Automatically searches for available input sources.
6.
Wide mode: You can select which screen aspect you are using. The options are Full,
Aspect
,1:1
.
7.
Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Volume,
Gamma, Contrast, Blue Light, Over Drive) and shortcut keys 2 (Modes, Brightness,
Volume, Gamma, Contrast, Blue Light, Over Drive)
8.
DDC/CI: Allows the monitor settings to be set through the software on the PC.
Adjusting the
System
