background image

English

Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located 

as close to the equipment operator as possible. When you need to disconnect power from 

the equipment, be sure to unplug the power cord from the electrical outlet.

Safe listening

To protect your hearing, follow these instructions.

• 

Gradually increase the volume until you can hear it clearly and comfortably and without 

distortion.

• 

After setting the volume level, do not increase it after your ears have adjusted.

• 

Limit the amount of time listening to music at high volume.

• 

Avoid turning up the volume to block out noisy surroundings.

• 

Turn the volume down if you can’t hear people speaking near you.

Warnings

• 

Do not use this product near water.

• 

Do not place this product on an unstable cart, stand or table. If the product falls, it could 

be seriously damaged.

• 

Slots and openings are provided for ventilation to ensure reliable operation of the 

product and to protect it from overheating. These openings must not be blocked or 

covered. The openings should never be blocked by placing the product on a bed, sofa, 

rug or other similar surface. This product should never be placed near or over a radiator 

or heat register, or in a built-in installation unless proper ventilation is provided.

• 

Never push objects of any kind into this product through cabinet slots as they may touch 

dangerous voltage points or short-out parts that could result in a fire or electric shock. 

Never spill liquid of any kind onto or into the product.

• 

To avoid dmage of internal components and to prevent battery leakage, do not place the 

product on a vibrating surface.

• 

Never use it under sporting, exercising, or any vibrating environment which will probably 

cause unexpected short current or damage internal devices.

Using electrical power

• 

This product should be operated from the type of power indicated on the marking label. 

If you are not sure of the type of power available, consult your dealer or local power 

company.

• 

Do not allow anything to rest on the power cord. Do not locate this product where people 

will walk on the cord.

Summary of Contents for Nitro XF243YPbmiiprx































Reviews: